The Aluminum Track System is a durable, economical solution at a fraction of the cost of high-end alternatives. These tracks are extruded from heavy duty T-5 aluminum with a dimension of 1 3/8” by 13/16” and a .058” wall thickness.
The Aluminum Track System is a classic standard for healthcare facilities nationwide, and is ideal for their simple installation and value. All Aluminum Track components are available for direct sale with or without installation.

Increase Patient Satisfaction




  • Aluminum privacy curtain track blends well with various ceiling types.
  • Can be configured with drop tubes to allow one curtain height.
  • Component parts can be configured in almost any layout.
  • All orders are shipped with all components, ready for easy installation.
  • Aluminum curtain track works with shower curtain application, in addition to privacy curtains.
  • The same finish and advantages are available in an IV Track System to match.


  • Works with most commercial carriers. We highly recommend our one piece nylon Spool Carrier with tangle-free swivel and nickel plated hook.
  • Design guides are available to help choose the best layout.
  • Bends are available in either 45° or 90° sections.


Curtain Track (Model CC-2012)

  • Extruded Aluminum construction is lightweight but strong.
  • 2” radius bends are available in either 90 or 45 degrees
  • Dimensions are 13/16” High by 1 3/8” Wide
  • Works with most commercial carriers. (CC-1002 is recommended)


End Cap (Model CC-2021)

  • Aluminum finish
  • All aluminum construction
  • Two part design
  • Easy to remove for service

Splice (Model CC-2022)

  • Aluminum Finish
  • Extruded Aluminum construction
  • Simple installation
  • Use with track CC-2012

Carrier List (Hooks)

Spool Carrier (Model CC-1002)

  • One piece nylon spool
  • Tangle-free swivel
  • Nickel-plated hook
  • Match with CC-1012 Track

Break-Away Carrier (Model CC-1003)

  • All nylon construction
  • Tangle-free swivel
  • Psychiatric and correctional facilities
  • Breakaway pressure: 15 lbs per hook

IV Track Options

IV Carrier (Model CC-1005)

  • Self-lubricating and maintenance-free
  • Glides smoothly around 12″ radius
  • Locks with single 180-degree twist
  • Non-conductive

IV Track (Model CC-1015)

  • Heavy Extruded Aluminum
  • White Enamel Finish
  • 12” Radius Bends
  • Use with Carrier CC-1005



Designed for use with all types of standard privacy curtains including cubicle curtains, drapes and shower curtains.


Heavy duty extruded aluminum track in an aluminum finish.

Standard Sizes

Track dimensions are 13/16 inch high by 1 3/8 inch wide and fit most commercial carriers. Infinite custom design configurations are possible using matching splices, bends and end-caps.

Routine Cleaning

Track components can be cleaned with non-corrosive commercial cleaners.

Installation guides are available, as well as professional installation services direct from HAIGuard™.

Mounting Specifications

*For all applications, only track and connectors are supplied. No screws, spacers or other hardware is included.

Measurement Guide

Layout Guide

Common Privacy Curtain Track Configurations

  1. For each track, determine the layout according to a template above or use a custom drawing.
  2. The layouts should be represented from a bird’s-eye view (as opposed to looking up at the ceiling).
  3. Indicate the length for each segment in a clockwise fashion using “A”, “B”, “C”, etc.
  4. Indicate 45° or 90° bends at each necessary location.
  5. Indicate required splices before and after each bend or straight section in excess of 8 feet.
  6. All tracks should have 2 end-caps unless noted otherwise.
  7. Provide a total length of all sections as confirmation.

Installation Guide

IV Carrier (Model CC-1005)

  1. Refer to layout drawing for location and determining required components. (track, splices, end-caps, and mounting hardware)
  2. Assemble track for each layout by attaching splice(s) and end-cap assemblies.
  3. Install on ceiling using suitable fastener for the type of ceiling. (See Mounting Specifications)
  4. Open end-cap gate and install the number of carriers needed.
  5. Secure end-cap gate in place to lock in carriers.

How To Measure for Tracks

Height from the track to the floor and a description of the track type (Standard, OTRT, Flex, etc.)

Total length of the perimeter of the track (All sides added together).

Indicate the correct layout from our guide or include a diagram. Also, identify if a layout is reversed.

Indicate hook type.

Send us photos of your facility!

Let us help you measure before you purchase.

Our facility consultants are standing by to help with the design and layout of your installation. If you need assistance measuring your space for any of our products, email us photos of your space and we will be in touch with our recommendations. 

Let's talk about preventing HAI's at your facility.

Fill out the form below to start the conversation.